Disclosure : This site contains affiliate links to products. We may receive a commission for purchases made through these links.

GE Desal (1207232) HL3308T 3.3″ X 8″ TFC; (10″ AMETEK) 230 GPD Nanofiltration Membrane


The H-Series proprietary thin-film nanofiltration membrane elements are characterized by an approximate molecular weight cut-off of 150-300 daltons for uncharged organic molecules. Divalent and multivalent ion rejection is dependent upon feed concentration and composition. HL Nanofiltration Elements are used for water softening, color removal, and reduction of THM potential. HL3308T Water Softening elements feature a tape outer wrap and 28 mil feed spacers. This element is designed with flush end connections.
are based on a 2,000 mg/L MgSO4 solution at 100 psig (690 kPa) net pressure, 77degree F (25degree C), pH 7.5, and 15% recovery, after 24 hours. Individual flux may vary +25%/-15%.Element
ModelFlowAvg. RejectionPart NumberHL3308T400 GPD (1.5 m3/d)98%1207232 Operating and Design ParametersMembrane: Thin Film Membrane (TFM)Typical Operating Pressure: 100 psig (690 kPa)Maximum Pressure: 450 psig (3,103 kPa)Maximum Temperature: 122degree F (50degree C)Chlorine Tolerance: Operating pH Range: 3.0-9.0Cleaning pH Range: 1.0-10.0Feed NTU: Feed SDI: Typical Operating Flux: 12-20 GFD (20-35) L.H-1.M-2Dimensions3.3″ Diameter x 8″ Length

About IsoPure Water
"Isopure Water carries a large variety of water filtration products ranging from whole house water filters to drinking water systems. We are one of the largest online product catalogs and take pride in our customer service ability. Isopure Water is a member of the Water Quality Association which holds us to ensure high quality service and products." --- IsoPure Water; More Details

More Details and Check Prices

Related Products :